Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
  • SM & SB Image
  • SM & SB Dimensional Drawing
  • Body - Low carbon steel, electroless nickel plated.
  • Ball - Alloy steel, heat treated, hard chrome plated.
  • Race - Stainless steel, heat treated.
  • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: SM-6Z = Zerk Type Fitting SM-6F = Flush Type Fitting.
  • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
  • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SM-8S.
  • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: SM-8T.
26 - 48 of 48 | Results Per Page | View | Unit of Measure
1 2 
Request Information Compare Items Search by Specification

Item #

Thread Type

B - Ball Bore

W - Ball Width

A - Base to Center

D - Head Diameter

Thread Size

Ultimate Radial Static Load Capacity

N/A Left Hand N/A .4375 in N/A .562 in N/A 2.125 in N/A 1.125 in N/A 7/16-20 N/A 4,218 lbs
N/A Right Hand N/A .4375 in N/A .562 in N/A 2.125 in N/A 1.125 in N/A 7/16-20 N/A Consult Engineering Department
N/A Left Hand N/A .4375 in N/A .562 in N/A 2.125 in N/A 1.125 in N/A 7/16-20 N/A Consult Engineering Department
N/A Right Hand N/A .4375 in N/A .562 in N/A 2.125 in N/A 1.125 in N/A 7/16-20 N/A Consult Engineering Department
N/A Left Hand N/A .4375 in N/A .562 in N/A 2.125 in N/A 1.125 in N/A 7/16-20 N/A Consult Engineering Department
N/A Right Hand N/A .5000 in N/A .625 in N/A 2.438 in N/A 1.312 in N/A 1/2-20 N/A 6,660 lbs
N/A Left Hand N/A .5000 in N/A .625 in N/A 2.438 in N/A 1.312 in N/A 1/2-20 N/A 6,660 lbs
N/A Right Hand N/A .5000 in N/A .625 in N/A 2.438 in N/A 1.312 in N/A 1/2-20 N/A Consult Engineering Department
N/A Left Hand N/A .5000 in N/A .625 in N/A 2.438 in N/A 1.312 in N/A 1/2-20 N/A Consult Engineering Department
N/A Right Hand N/A .5000 in N/A .625 in N/A 2.438 in N/A 1.312 in N/A 1/2-20 N/A Consult Engineering Department
N/A Left Hand N/A .5000 in N/A .625 in N/A 2.438 in N/A 1.312 in N/A 1/2-20 N/A Consult Engineering Department
N/A Right Hand N/A .6250 in N/A .750 in N/A 2.625 in N/A 1.500 in N/A 5/8-18 N/A 7,364 lbs
N/A Left Hand N/A .6250 in N/A .750 in N/A 2.625 in N/A 1.500 in N/A 5/8-18 N/A 7,364 lbs
N/A Right Hand N/A .6250 in N/A .750 in N/A 2.625 in N/A 1.500 in N/A 5/8-18 N/A Consult Engineering Department
N/A Left Hand N/A .6250 in N/A .750 in N/A 2.625 in N/A 1.500 in N/A 5/8-18 N/A Consult Engineering Department
N/A Right Hand N/A .6250 in N/A .750 in N/A 2.625 in N/A 1.500 in N/A 5/8-18 N/A Consult Engineering Department
N/A Left Hand N/A .6250 in N/A .750 in N/A 2.625 in N/A 1.500 in N/A 5/8-18 N/A Consult Engineering Department
N/A Right Hand N/A .7500 in N/A .875 in N/A 2.875 in N/A 1.750 in N/A 3/4-16 N/A 11,518 lbs
N/A Left Hand N/A .7500 in N/A .875 in N/A 2.875 in N/A 1.750 in N/A 3/4-16 N/A 11,518 lbs
N/A Right Hand N/A .7500 in N/A .875 in N/A 2.875 in N/A 1.750 in N/A 3/4-16 N/A Consult Engineering Department
N/A Left Hand N/A .7500 in N/A .875 in N/A 2.875 in N/A 1.750 in N/A 3/4-16 N/A Consult Engineering Department
N/A Right Hand N/A .7500 in N/A .875 in N/A 2.875 in N/A 1.750 in N/A 3/4-16 N/A Consult Engineering Department
N/A Left Hand N/A .7500 in N/A .875 in N/A 2.875 in N/A 1.750 in N/A 3/4-16 N/A Consult Engineering Department
26 - 48 of 48 | Results Per Page | View | Unit of Measure
1 2