SW-E & SG-E Series Stainless Steel Female Rod Ends, Corrosion Resistant - Ptfe Liners Available On Aurora Bearing Co.

Body - 17-4 PH stainless steel per AMS 5643, heat treated.
Ball - 440C stainless steel per AMS 5630, heat treated, hard chrome plated.
Race - 17-4 PH stainless steel per AMS 5643, heat treated.
Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: SW-6EZ = Zerk Type Fitting SW-6EF = Flush Type Fitting.
Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
Studded configuration available upon request. Specify by adding suffix "S". Ex.: SW-8ES.
PTFE Liners available upon request. Specify by adding suffix "T". Ex.: SW-8ET.

Item #	Thread Type	B - Ball Bore	W - Ball Width	A - Base to Center	D - Head Diameter	C - Thread Depth [inch]	Thread Size	Ultimate Radial Static Load Capacity
SW-16EZ	N/A Right Hand	N/A 1.0000 in	N/A 1.375 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1 1/4-12	N/A 61,333 lbs
SG-16EZ	N/A Left Hand	N/A 1.0000 in	N/A 1.375 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1 1/4-12	N/A 61,333 lbs
SW-16EF	N/A Right Hand	N/A 1.0000 in	N/A 1.375 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1 1/4-12	N/A 61,333 lbs
SG-16EF	N/A Left Hand	N/A 1.0000 in	N/A 1.375 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1 1/4-12	N/A 61,333 lbs