MW & MG Series Female Rod Ends, General Purpose - Precision On Aurora Bearing Co.

Body - Low carbon steel, protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
Ball - Alloy steel, heat treated, hard chrome plated.
Race - Low carbon steel, protective coated for corrosion resistance.
Left-hand threaded units have an identification groove near end of shank.
Grease Fitting available for sizes -3 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MW-6Z = Zerk Type Fitting MW-6F = Flush Type Fitting.
Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
Studded configuration available upon request. Specify by adding suffix "S". Ex.: MW-8S.
PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MW-8T.

Item #	Thread Type	B - Ball Bore	W - Ball Width	H - Head Width	A - Base to Center	D - Head Diameter	C - Thread Depth [inch]	Thread Size	Ultimate Radial Static Load Capacity
MG-16-2	N/A Left Hand	N/A 1.0000 in	N/A 1.375 in	N/A 1.000 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1-12	N/A 43,541 lbs
MW-16Z-2	N/A Right Hand	N/A 1.0000 in	N/A 1.375 in	N/A 1.000 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1-12	N/A 43,541 lbs
MG-16Z-2	N/A Left Hand	N/A 1.0000 in	N/A 1.375 in	N/A 1.000 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1-12	N/A 43,541 lbs
MW-16F-2	N/A Right Hand	N/A 1.0000 in	N/A 1.375 in	N/A 1.000 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1-12	N/A 43,541 lbs
MG-16F-2	N/A Left Hand	N/A 1.0000 in	N/A 1.375 in	N/A 1.000 in	N/A 4.125 in	N/A 2.750 in	N/A 2.125 in	N/A 1-12	N/A 43,541 lbs