Aerospace / Military Commercial / Industrial Technical Resources Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
  • Ball - 52100 steel, heat treated, phosphate coated.
  • Race - 52100 steel, heat treated, single fracture, phosphate coated.
Unit of Measure



N/A Open

B - Ball Bore Max.

N/A .6250 in

B - Ball Bore Min.

N/A .6245 in

D - Outside Diameter Max.

N/A 1.0625 in

D - Outside Diameter Min.

N/A 1.0620 in

W - Ball Width Max.

N/A .547 in

W - Ball Width Min.

N/A .542 in

H - Race Width Max.

N/A .469 in

H - Race Width Min.

N/A .459 in

O - Ball Shoulder Diameter

N/A .720 in

C - Ball Chamfer Min.

N/A .006 in

M - Race Chamfer

N/A .024 in

a - Misalignment Angle

N/A 6 º

Radial Static Limit Load

N/A 14,612 lbs

Approximate Brg. Weight

N/A .08 lb

GEZ..ES Open & GEZ..ES-2RS Sealed Note

These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a 1.5 factor of safety against static fracture.
Bearings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40° F and + 250° F (-40° C and +121° C). For operating temperatures outside of this range, consult lubricant manufacturer.
Bearings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. Demand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level.