Aerospace / Military Commercial / Industrial Technical Resources Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
  • Ball - Alloy steel, heat treated, phosphate coated.
  • Race - Alloy steel, heat treated, single fracture, phosphate coated.
Unit of Measure

Specifications

Type

N/A Open

B - Ball Bore Max.

N/A 25.000 mm

B - Ball Bore Min.

N/A 24.990 mm

D - Outside Diameter Max.

N/A 42.000 mm

D - Outside Diameter Min.

N/A 41.989 mm

W - Ball Width Max.

N/A 20.00 mm

W - Ball Width Min.

N/A 19.88 mm

H - Race Width Max.

N/A 16.00 mm

H - Race Width Min.

N/A 15.76 mm

O - Ball Shoulder Diameter

N/A 29.00 mm

C - Ball Chamfer Min.

N/A .60 mm

M - Race Chamfer

N/A .60 mm

a - Misalignment Angle

N/A 7 º

Radial Static Limit Load Capacity

N/A 240 kN

Approximate Brg. Weight

N/A 119 g

GE..ES Open & GE..ES-2RS Sealed Note

N/A GE-12E only available without lube grooves and holes.
RADIAL STATIC LOAD CAPACITY
These loads are the maximum safe operating loads for stationary applications, and assumes a sufficiently rigid housing and shaft. The radial static load capacity provides a 1.5 factor of safety against static fracture.
LUBRICATION
Bearings should only be used as delivered for static applications. For dynamic applications, a lithium-based grease with EP and MOS2 additives is especially suitable. Lubricants of this type are recommended for operating temperatures between -40° F and + 250° F (-40° C and +121° C). For operating temperatures outside of this range, consult lubricant manufacturer.
Bearings should be adequately lubricated before installation, and relubricated at suitable intervals based on application demands. Demand factors include load and load direction, misalignment angle and frequency, ambient temperature and contamination level.