Aerospace / Military Commercial / Industrial Technical Resources Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
  • SPW & SPG Image

    This series features a molded race compound designed to provide low friction, low moisture absorbing properties.

    • Body - Low carbon steel, protective coated for corrosion resistance.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Race - Molded, self-lubricating, reinforced Nylon.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SPW-8S.

  • CW & CG Image

    • Body - Low carbon steel, protective coated for corrosion resistance.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Left-hand threaded units have an identification groove near end of shank.
    • Grease Fitting available for sizes -4 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CW-6Z = Zerk Type Fitting CW-6F = Flush Type Fitting
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: CW-8S.

  • VCW & VCG Image

    • Body - Low carbon steel, protective coated for corrosion resistance.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Bushing - Steel backed, PTFE composite.
    • Left-hand threaded units have an identification groove near end of shank.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: VCW-8S.

  • MW & MG Image

    • Body - Low carbon steel, protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Race - Low carbon steel, protective coated for corrosion resistance.
    • Left-hand threaded units have an identification groove near end of shank.
    • Grease Fitting available for sizes -3 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MW-6Z = Zerk Type Fitting MW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: MW-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MW-8T.

  • MW-T & MG-T Image

    • Body - Low carbon steel, protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Race - Low carbon steel, protective coated for corrosion resistance, PTFE lined.
    • Left-hand threaded units have an identification groove near end of shank.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: MW-8TS.

  • KW & KG Image

    • Body - Low carbon steel, protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Race - Alloy steel, heat treated, protective coated for corrosion resistance.
    • Left-hand threaded units have an identification groove near end of shank.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: KW-6Z = Zerk Type Fitting KW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: KW-8S.

  • KW & KG, AW & AG Large Bore Image

    • Body (K-Series) - Alloy steel, protective coated for corrosion resistance.
    • Body (A-Series) - Alloy steel, heat treated, protective coated for corrosion resistance.
    • Ball - 52100 steel, heat treated, protective coated for corrosion resistance.
    • Race - 52100 steel, heat treated, protective coated for corrosion resistance.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: KW-24Z-1 = Zerk Type Fitting KW-24F-1 = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: KW-24T-1.

  • MW-T & MG-T, AW-T & AG-T Large Bore Image

    • Body (M-Series) - Alloy steel, protective coated for corrosion resistance.
    • Body (A-Series) - Alloy steel, heat treated, protective coated for corrosion resistance.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Race - Low carbon steel, PTFE lined.

  • AW & AG Image

    • Body - Alloy Steel, heat treated, protective coated for corrosion resistance.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Race - Alloy steel, heat treated, protective coated for corrosion resistance (Low carbon steel with PTFE liners).
    • Units in this series will be magnafluxed on special request only. Specify by adding suffix "M". Ex.: AW-8M.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: AW-6Z = Zerk Type Fitting AW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: AW-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: AW-8T.

  • CW-ET & CG-ET Image

    • Body - 17-4 PH stainless steel per AMS 5342, heat treated.
    • Ball - 440 C stainless steel AMS 5630, heat treated, hard chrome plated.
    • Bushing – 17-4 PH stainless steel, heat treated, PTFE lined.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: CW-8ETS.

  • SW & SG Image

    • Body - Low carbon steel, electroless nickel plated.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Race - Stainless steel, heat treated.
    • Left-hand threaded units have an identification groove near end of shank.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: SW-6Z = Zerk Type Fitting SW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SW-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: SW-8T.

  • SW-E & SG-E Image

    • Body - 17-4 PH stainless steel per AMS 5643, heat treated.
    • Ball - 440C stainless steel per AMS 5630, heat treated, hard chrome plated.
    • Race - 17-4 PH stainless steel per AMS 5643, heat treated.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: SW-6EZ = Zerk Type Fitting SW-6EF = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SW-8ES.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: SW-8ET.

  • CW-S & CG-S Image

    • Body - Low carbon steel, protective coated for corrosion resistance.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Stud - Low carbon steel, protective coated for corrosion resistance.Right hand thread standard.
    • Left hand units have identification groove near end of shank.
    • Grease Fitting available for sizes -4 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CW-6SZ = Zerk Type Fitting CW-6SF = Flush Type Fitting.
    • Optional grease fitting is supplied, standard, in right hand location as illustrated (with stud facing you). Specify if left hand location is desired.

  • ASW-T & ASG-T Image

    • Body - 4340 alloy steel per AMS 6415, heat treated, cadmium plated.
    • Ball - 440C stainless steel per AMS 5630, heat treated.
    • Race - 17-4 PH stainless steel per AMS 5643, heat treated.
    • PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820.
    • Temperature range: -65°F to +325°F.
    • No load rotational breakaway torque can be varied to meet specific application requirements.
    • Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ASWK-3T.
    • As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.
    • Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/2, and are approved for procurement under this specification.

  • GMW-M & GMG-M Image

    • Body - Low carbon steel, protective coated for corrosion resistance.
    • Ball - Alloy steel, heat treated, hard chrome plated.
    • Race - Low carbon steel,protective coated for corrosion resistance.
    • Left-hand threaded units have an identification groove near end of shank.
    • Grease Fitting available for all sizes. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: GMW-3MZ-470 = Zerk Type Fitting GMW-3MF-470 = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, consult our engineering department.
    • For rod end bearings which are non-traceable or non-magnetic particle inspected, consult factory.